Video
1 / 4
Model No. : | CXLD |
---|---|
Brand Name : | CX |
place of origin : | China |
Kaifeng, Henan, China
Produktbeschreibung
Kaifeng Chuangxin 'Elektromagnetischer Durchflussmesser besteht aus Sensor und Konverter. Es ist in zwei Formen erhältlich: Kompakttyp und Remote-Typ. Der Remote-Typ benötigt außerdem ein spezielles, doppeltes Schichtkabel zum Anschließen des Konverters und des Sensors. Es gibt sieben Arten von Elektrodenmaterialien und vier Arten von Auskleidungsmaterialien für Sensoren.
Das Messprinzip des elektromagnetischen Durchflussmessers basiert auf dem Gesetz über das elektromagnetische Induktionsgesetz in Farady. Der Sensor besteht hauptsächlich aus Messrohr mit Isolatauskleidung, einem durch Eindringen der Messrohrwand, ein Spulenpaar und ein Eisenkern eingebautes Elektrodenpaar, um ein Arbeitsmagnetfeld zu erzeugen.
Merkmale:
Ø Nicht durch Flüssigkeitsdichte, Viskosität, Temperatur, Druck und Leitfähigkeit beeinflusst;
Ø Keine beweglichen Teile im Messrohr, kein Druckverlust und niedrigere Anforderungen für gerade Rohrabschnitte.
Ø B idirektionales Messsystem mit drei eingebauten Totalisierern, Vorwärts-Gesamt, umgekehrter Gesamt- und Differenz-Gesamt;
Ø Vorwärts- und Rückfluss anzeigen, mehrere Ausgänge: Strom, Impuls, digitale Kommunikation, Hart;
Ø Angemessene Auswahlmaterialien von Liner und Elektrode, ausgezeichnete Korrosionsbeständigkeit und Verschleißfestigkeit;
Ø E Xcitation -Modus C onverter mit LOW -Stromverbrauch , stabiler Nullpunkt und hoher Genauigkeit.
Ø Verwendung der Oberflächenmontage-Technologie (SMT) mit Selbsttest- und Selbstdiagnosealarmausgang, Alarmausgabe des leeren Lasterkennung, der oberen und unteren Grenze Alarmausgabe, der Batch-Steuerung und anderer Funktionen .
Ø Durch Infrarot -Touch -Tasten ist die Parametereinstellung bequem und die Programmierung zuverlässig .
Item
|
The Specifications of electromagnetic flowmeter
|
Installation Type
|
Split/remote
|
Measuring fluid
|
conductive fluid and slurry
|
Caliber
|
DN6-DN3000
|
End connection
|
Flange, threaded, clamping, insertion type, etc.
|
Electrode materials
|
Mo2Ti , Hastelloy C, Hastelloy B, Pt Ta Ti
|
Flange standard
|
GB, DIN, JIS, EN, SABS, etc.
|
Lining Material
|
PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber), F46
|
Electrode Type
|
Standard type 316L, scraper-type (DN ≥ 50)
|
Dielectric conductivity
|
≥5μs/cm (water≥ 20μs/cm)
|
Accuracy grade
|
±0.5% RS.
|
Flow Range
|
0-10m/s
|
Maximum temperature
of medium |
For rubber liner ≤ 80 °C, for PTFE liner ≤ 120°C
|
Ambient temperature
|
-20 - +60
|
Working pressure
|
0.6Mpa-4.0Mpa, the special high rpressure is available
|
Protection Level
|
IP65, IP67, IP68 (optional)
|
Power
|
220VAC(85~250 voltage) 24VDC(11~40 voltage)
|
Display
|
Forward and backward instantaneous flowrate, total flow, velocity, flowrate percentage with back light
|
Output
|
4-20mA current output ,0-1kHz frequency output, pulse output per unit volume
|
Communication
|
RS485 and Modbus, RS232 and Modbus, HART, Profibus, GPRS, etc.
|
Electrode Material
|
Application
|
Molybdenum-containing stainless steel (0Cr18N12Mo2Ti)
|
Applicable to industrial/municipal water, wastewater and low corrosive mediums.
Widely used in petroleum, chemical industries. |
Hastelloy B
|
Strong resistance to hydrochloric acids below the boiling point.
Resist against oxidable acids, alkali and non-oxidable salts. For instance, vitriol, phosphate, hydrofluoric acids, and organic acids. |
Hastelloy C
|
Exceptional resistance to strong solutions of oxidizing salts and acids.
For example, Fe+++, Cu++, Nitric acids, mixed acids |
Titanium
|
Titanium can withstand corrosive mediums such as seawater, chloride salt solutions, hypochlorite salts, oxidable acids(including
fuming nitric acids), organic acids, and alkali. Not resistant to high purity reducing acids such as sulphuric acids, hydrochloric acids. |
Tantalum
|
Highly resistant to corrosive mediums.
Applicable to all chemical mediums except Hydrofluoric Acids, Oleum and Alkali. |
Platinum-iridium
|
Applicable to all chemical mediums except for Ammonium salts and Fortis.
|
Liner material |
Main performances |
Applicability |
Polytetrafluoroethylene (PTFE) |
1.It is a plastic material with the stablest Chemical properties, resist the corrosion of Boiling Hydrochloric acid, sulfuric acid, nitric acid, aqua regia, Concentrated alkali and many kinds of organic solvent, unable to resist the corrosion of chlorine trifluoride, high Temperature vanadyltrifluoride, high flow-rate liquid fluorine, liquid oxygen and ozon; 2.Poor abrasion resistance; 3.Poor ability of anti-negative pressure. |
1.100℃,150℃(special order required); 2.Strong corrosive medium like concentrated acid , alkali, etc.; 3.Sanitary medium. |
Polychloroprene rubber (Neoprene) |
1.Excellent elasticity, high degree of tensile strength,good wear resistance; 2.Able to resist the corrosion of generally low concentration acid, alkali and salt, unable to resist that of the oxidative medium. |
1.80℃,120℃(special order required); 2.General water, polluted water, weak wear ability mud and ore pulp. |
Polyurethane rubber (PU) |
1.Excellent wear resistance (ten times of the natural rubber’s); 2.Poor abrasion resistance of acid and alkali; 3.Not able to work with water mixed with organic solvent. |
1.<80℃; 2.Middle and strong wear ability ore pulp, coal pulp, mud, etc.. |
PFA |
Having the same abrasion resistance with PTFE.Having strong ability of load pressure resistance. |
1.Below 220℃ 2.Applicable in state of load pressure. |
F46 |
1.Have the same abrasion resistance with PTFE. 2.Resistable for low abrasion. 3.Having strong resistance to load pressure. |
1.Below 220℃ 2.The same as PTFE. 3.Applicable in mediums of low abrasion. |
Video
Kaifeng, Henan, China
Senden Sie Ihre Anfrage an diesen Lieferanten